Washing Machine Repair
Washing Machine Repair
Front load, top load and semi-automatic machines — drainage problems, drum noise, spin failures, motor and control board faults, repaired at your home.
Overview
Most faults are wear, water or overloading
A large share of washing machine call-outs come down to three things: hard water scaling the heating element and drum, too much detergent leaving residue through the pipes, and loads heavy enough to wear out the drum bearings. All three are avoidable, and all three are repairable if they are caught before the bearing or the board goes.
We diagnose on site, explain what has failed and what it will cost, and get your approval before starting. Where a fault is being caused by how the machine is installed or used — a siphoning drain hose, a machine that is not level, the wrong detergent — we will tell you that too, so it does not simply happen again.
What We Do
What Washing Machine Repair Covers
Automatic and semi-automatic machines, including front load models with electronic controls.
Draining & Filling
Drain pump failures, blocked filters, faulty inlet valves and pressure switches that leave the machine full or empty.
Drum & Bearings
Grinding or knocking on spin, worn drum bearings, damaged spiders and loose counterweights.
Spin Failures
Machines that wash but will not spin, or that stop mid-cycle with the load still soaked.
Motor & Belt
Drive belts, motor brushes, motor windings and the control triac on machines that will not turn the drum.
PCB & Error Codes
Electronic control boards, display faults and diagnosis of the error code your machine is reporting.
Leaks & Door Seals
Perished inlet hoses, split door gaskets, sump leaks and the mould that follows them.
Symptoms
Common Washing Machine Faults We Attend
If any of these sound familiar, the appliance needs looking at rather than living with.
- Machine fills but the drum will not rotate
- Water not draining at the end of the cycle
- Loud grinding or knocking during the spin
- Clothes still soaking wet after the spin cycle
- Machine walks across the floor when spinning
- Water leaking from under the machine
- Error code on the display and the cycle stops
- Sour smell from the drum or the door seal
Process
What to expect on the day
You know the price before stage four.
01
Book a slot
Give us the make, model and what the machine is doing. That decides which parts the technician loads before setting out.
02
On-site diagnosis
A live test cycle is run and any stored codes read, with drainage, inlet, motor and drum checked before anything is quoted.
03
Price confirmed first
You are told what has failed and what it costs. Work starts only once you agree.
04
Repair on site
Most faults are fixed in your home in one visit. Only bearing work occasionally needs the machine taken away.
05
Test and hand over
We run a full cycle with you watching, hand over the replaced part, clean up and issue the warranty.
Why NTS
What we do differently
Booked around your day
Tell us when suits you and we will confirm the earliest slot we can actually keep, rather than one we cannot.
One visit wherever possible
The technician loads the likely parts before setting out, based on what you describe at booking. Most jobs finish without a second trip.
The price before the work
You are told what has failed and what it costs before anything is opened up. Nothing is dismantled on the assumption you will pay for whatever is found.
A warranty you can hold
Warranty available on eligible repairs, plus the manufacturer warranty on any part fitted. Same fault inside that period, we return at no charge.
Brands
Brands We Service
We work on washing machines from all the major manufacturers sold in India.
LG
Samsung
Whirlpool
IFB
Bosch
Godrej
Haier
Panasonic
Voltas
Blue Star
Daikin
Lloyd
Independent multi-brand service provider. Not affiliated with or authorised by the manufacturers listed. All brand names are the property of their respective owners.
FAQ
Washing Machine Repair — Common Questions
Why will my machine not drain?
On a front load machine the drain-pump filter is the first suspect — coins, buttons and lint collect there and block it. If the filter is clear, it is usually the pump itself or a blocked drain hose.
My machine is very noisy on spin. Is that serious?
Grinding or rumbling on spin usually means the drum bearings are going. It is worth attending early: run for long enough, a bearing failure can damage the drum and turn a moderate repair into a replacement.
Do you repair semi-automatic machines as well?
Yes, including timer, spin motor, wash motor and gearbox faults on semi-automatic machines, as well as fully automatic front and top load models.
Can hard water damage a washing machine?
It scales the heating element and the drum, which makes the machine work harder and shortens element life. A monthly hot cycle with a descaler helps, and we will tell you if scaling is what caused your fault.
Your City
Where would you like Washing Machine Repair?
We work across Gurgaon, Noida, Delhi and Faridabad. Pick your city for local response times, coverage areas and pricing.
Book Now
Tell us what has gone wrong
Send the form and we will call you back to confirm a slot.
Rather talk to someone?
Call and describe the fault. We will tell you what is likely wrong, what the visit involves and whether we can cover your address.
We call you back to confirm the slotThe technician diagnoses the fault at your homeYou approve the cost before any work starts
Need Washing Machine Repair today?
Tell us what the appliance is doing and we will call you back to agree a slot. Pricing is confirmed with you before any work starts.